Showing posts with label Heating. Show all posts
Showing posts with label Heating. Show all posts

Thursday, January 3, 2008

Oil Filled Radiator Heaters - How They Work, And Uses

Why buy a Oil Filled Radiator Heater instead of different types?

The most obvious reason to purchase a oil filled radiator heater is for safety and a silent operation. These heaters operate by warming up a special heat-conserving oil inside the heater. Then it circulates the oil throughout the coils and fins of the radiator to heat them. Those coils and fins radiate the heat into the rest of the room through convection. Cold air is warmed by the heat radiating from the fins of the heater and the warmed air rises drawing in the air below it which is usually colder than the air above and the process repeats. Since it does not have fans to move the air around the radiator is silent.

How are Oil Filled Radiator Heaters different from other heaters?

The heat conserving oil is sealed inside the coils of the radiator. Since the oil is only warmed, is never burned, and never needs to be replaced or refilled it makes oil filled radiator heaters very efficient to operate. In addition, some heaters have safety covers that prevent children and pets from touching the heating elements that radiate the warmth. Generally they have a lower surface temperature than other heaters, and because of the large surface area of the heater they heat the room just as fast.

How do most people use Oil Filled Heaters?

These radiators are perfect for chilly bedrooms and offices. They spot heat anywhere, and can be very compact. Some are light in weight, letting you place them anywhere where you need a little bit more heat. Several are made to fit into the area beneath a desk so they can be unobtrusive and since they are quiet nobody would notice their presence. Another important thing about the under desk radiators is that they only take 40 watts of power to run so you could plug them into the same circuit as your computer. The area of heat our radiator heaters can warm range from 150 square feet to an area as small as 40 square feet for an under desk style unit. An added benefit of the small desk-type units is that they are extremely efficient.

Buy a SAFE Oil Filled Radiator Heater for personal comfort.

These heaters are ideal if you just need that extra bit of warmth or your co workers prefer it colder than you like, or when you would like to save money by not heating the whole building and only your little corner of the house. Not only are they safer than other heaters with tip over safety switches and overheat auto shutoff switched, they require almost no maintenance, and are quite easy to move.

Product specialist working with heaters

By G Lee

Residential Garage Heaters - 4 Things You Must Know Before Using One

Residential garage heaters are one of the best ways of heating your shop or garage during the colder months of the year. While it may sound easy to just buy any heater and use it for heat, there are some very important things you should realize first before purchasing or using a garage heater.

There are a variety of types

The first type to identify is the heater by it's fuel source. There are propane, natural gas, and electric garage heaters.

Propane and natural gas heaters require the use of a vent so that the emissions will not be in the air you are breathing inside. They can be safely used when vented properly, but if you do not know how to do this, this isn't the best model for you.

For those that don't know how to vent their heater, an electric heater for the garage is the best option. Electric heaters don't require a vent so they can be used indoors. Of course you should always read the directions to make sure the heater is approved for indoor use.

Should I use the ceiling, walls, or floors?

Besides different fuel sources, there are different types of garage heaters as well. If you are going for a portable option, use a floor heater. You can also go with a wall mounted or ceiling mounted solution. Overhead heaters for the garage are the easiest to work with since they are out of the way and don't take up any floor space.

How to get the right size?

Getting the proper size for most residential garages is easy. Most residential garage heaters are made for one or two car garages. So if you have a garage around 500-700 feet, a heater labeled as a garage heater should suit your needs. If you have a larger garage or shop, you should look for a shop heater or industrial shop heater since these can accommodate larger areas.

Another solution is to get more than one wall mounted heater if you have an area that is larger than the average two car garage. If it's not as cold, you can turn one or two of them off and control the temperature a little better.

What's the best heater for the garage for the average person?

The best option are the wall mount electric garage heaters. Overall they are the safest since you don't have to worry about venting the gases like in propane heaters and they are out of the way so you won't trip over them or accidentally touch them. They are also the easiest to install and you have a constant source of power, your electricity.

For more information on Garage Heaters and Shop Heaters visit http://www.mypatioheater.com, a

By Lance Esondi

Wood Burning Stove And Fireplace Safety

Wood burning stoves and fireplaces are found in a great many homes. As a working home inspector in the Pacific Northwest, where we have lots of available firewood, I can honestly say that, more often than not, there is some glaring problem that makes these devices unsafe and in need of professional service.

The issues range from heavy deposits of creosote (in the flue, the stove or the fireplace) to broken firebricks, bad gaskets at doors, cracks, insufficient clearances to combustibles such as walls, or a hearth that is too short. A hearth should extend out 18" from the door opening. At many units I inspect, probably at least half of them, the hearth is short. It might go out 9" and then there is a flammable carpet or a wood floor. I can tell you, from experience, that those surfaces are often charred from prior close calls and glowing embers. The client can buy a fireproof mat to put down, or extend the hearth out farther.

When safety issues are found with these devices, a home inspector should defer the system to a professional chimney sweep or other professional. In fact, the National Fire Protection Association has stated that a Level 2 chimney inspection should be part of every sale or transfer of property. A Level 2 inspection is an in-depth inspection by a specially trained and licensed chimney professional. Any fireplace or stove and the flue, and all associated components, are carefully analyzed for safety and performance.

As an inspector, who sees lots of these devices, I think that this is sound advice. Fire safety is too important to ignore!

Steven L. Smith, owner of King of the House, Inc home inspection is a licensed structural pest inspector and a certified home inspector in Bellingham WA. Smith is the program coordinator for the college level home inspection training program at Bellingham Technical College.
www.kingofthehouse.com


By Steven L. Smith

Fueled Heaters - Are They Right for You?

As an alternative to electric heaters, fueled heaters such as those using propane or kerosene also have many benefits. Though these types of heaters may not suitable for home use because they need to be vented due to carbon monoxide emissions, if you are looking to quickly heat your patio, warehouse, or other large, well-ventilated area, these are a great option. Several sized propane and kerosene heaters are available for rapidly heating up large areas, and these types of heaters are very efficient because they use the heat from combustion to directly heat the space through convection.

Although heaters running on electricity may seem like a cost efficient and clean energy source, most electricity in the United States is generated by burning coal, which emits sulfur dioxide, nitrous oxides, particulates, and greenhouse gases. Some electricity is generated from natural gas, which burns cleaner, but at least half of the energy is lost in converting it to electricity and delivering it to your home. Therefore, although the initial cost of an electric heater may be significantly less than a propane or kerosene heater, the cost of fuel should be taken into account.

Propane Heaters

These heaters often come in the form of patio heaters and gas fired heaters, and they are relatively small for the amount of space they are able to heat. Because they do not require electricity to run, they are very cost-effective for warehouses and industrial settings where there is ample ventilation and when electricity may be too costly.

You can either buy tanks of propane according your consumption, or rent them from your propane supplier. In order to estimate your propane consumption, you can figure this out with a bit of math. One gallon of propane will produce 91,500 Btus of heat. If you have a heater that is rated at 25,000 Btus per hour, simply divide 91,500 by 25,000 and you will find that your heater will run for approximately 3.66 hours on one gallon propane when running at full capacity.

If you spend 80 hours a month in your shop or workplace, you will go through about 22 gallons of propane per month. See the following formula to determine propane consumption:
91,500 / Heater Btus per hour = Hours the Heater Will Run on One Gallon of Propane
If you are looking to buy a small portable tank instead of leasing a large one, keep in mind that propane tanks hold 80 percent of their rated capacity; therefore, a tank rated at 10 gallons would actually hold eight. With that in mind, for a 25,000 Btu heater, eight gallons of propane would provide you with over 29 hours of use (8 gallons x 3.66 hours per gallon), so you would have to fill it twice a month.

Kerosene Heaters

In addition to propane heaters, kerosene heaters are also another option. Though they use electricity, these have almost the same function as propane heaters and burn cleaner. These can also provide localized heat for tough industrial work areas and warehouses, and like propane heaters, they are not recommended for indoor use because of carbon dioxide emissions, risk of burns, ignition from flammable gases, and the obvious increased risk of fire. Using a kerosene heater requires good judgment and safety practices, and these must be adequately vented at four times greater per Btu/hour for unvented heaters than for vented heaters.

Jeanie Wong is a marketing writer with extensive knowledge of heating, cooling, and purification systems

By Jeanie Wong

What Is Insufficient Heat In the Home?

One thing you should never take for granted in a home you are buying, especially an older home, is that it will have a sufficient number of heat sources. In many older houses, a single space heater might be all there is to heat the whole house.

Are you safe, from discovering this kind of problem, if you are buying a new home? Not really. I have inspected newer houses where, for one reason or another, one room had no heat duct. And with brand new homes, at least 30% of the time, I find heat ducts that supply zero warmth. Why? Well, almost always, the flex heat duct has never been connected to the furnace, it has come loose because it was poorly attached, or someone has crushed it so it is as flat as a bagel and no heat can get through it.

As a home inspector, or even for a homeowner planning to move into a home, a simple and fairly inexpensive device that is handy for checking all the ducts, while the furnace is running, is a laser thermometer. I use this tool at almost every inspection and it saves bending down to feel for heat. A person can walk through a room, and point it from several feet away, and get a reliable reading that indicates whether or not heat is coming out the supply register, the baseboard, etc.

A heating professional should be consulted, in those cases where there is insufficient heat the result of lack of maintenance, damage, installation problems or poor planning and design. Generally, heat should be available in every livable room. It is not necessary in closets or, imagine this, bathrooms. Realistically, in colder climates I think a bathroom should be heated. Sometimes the builders do that with a bathroom heat lamp. Other available means of heating a home, when it is found to have insufficient heat, include upgrading the furnace system or adding electric, propane or gas heaters to the cold rooms.

Steven L. Smith, owner of King of the House, Inc home inspection is a licensed structural pest inspector and a certified home inspector in Bellingham WA. Smith is the program coordinator for the college level home inspection training program at Bellingham Technical College.
http://www.kingofthehouse.com

A Solar Water Heating System Can Help Cut Your Fuel Bills

One modern day luxury that we often take for granted is the ability to have a hot bath or shower at the flick of a water faucet. If you are like me, a hot shower is a great way to relax after a busy day at work. An even better way to relieve stress is to spend a few hours in a hot bath that has a few drops of relaxing essential oil. Of course it was not always this easy and in many parts of the world is seen as a great luxury. It is estimated that the average home spends more money on heating water than any other energy need. In most homes this is done by using grid electricity to power a water heater.

The down side to this is that grid electricity is powered by fossil fuels that are linked to causing environmental problems and are ultimately finite. What this means is that in time using this method to heat your water is bad for the planet and bad for your wallet. An alternative to this is to use a solar water heating system. This article will explain some of the important parts and how the system works.

One of the first things to consider when thinking about solar power is to make your home more energy efficient. This means using the energy created to the utmost and getting as much energy from the source as possible. In terms of creating hot water this means insulating your hot water tank so that heat is not lost to the environment.

Most tanks have some form of insulation but if your system is old, the insulation might not be the best or may need replacing. You should also look at the one that you use. This may be an old resistive type heater and should be replaced by more modern heaters that can be up to 5 times more efficient at heating water. Heat water pumps are a very efficient way of heating water. These systems can either reduce or eliminate your need for grid powered water heating.

Many people start off with a system that integrates into the existing grid powered system because this provides the least amount of change or disruption to the home. As a person gets more comfortable with the idea of solar power they may move onto total solar powered water heating.

The two types of solar water heating systems are known as flat plate collectors and batch collectors. Flat plate collectors are simply a length of piping that allows liquid to pass through it.

The pipes are located on a surface that comes in contact with the sun. So the roof top is often the most suitable place and also is out of the way so the system is unlikely to be damaged. The pipes in the flat plate collector are painted black on the underside to absorb heat. The side facing the sun often have a glass that helps to absorb and distribute the sunlight to the liquid. Batch collectors are a water tank that is insulated to absorb heat. Thus they will be painted black also.

The water that is heated by these two systems can then be plumbed into the conventional heating system. As the water is already heated the conventional system will use less electricity to heat the water. As your use of solar power evolves you will move to using solar panels to provide the electricity to power the hot water heater. At this stage you will be utilizing the full power of the sun to heat water for your home.

Solar power can be applied to many house and garden products. In recent years the cost of these appliances have become very affordable and saved money on energy bills. Learn more about solar powered appliances at http://www.solarpowerappliances.com - The site has features on solar water heating systems and various solar power related articles. Adrian Whittle writes about using solar power and appliances that can utilize renewable energy sources.

By Adrian Whittle

Keep It Safe - Heater Safety Tips

Although heaters can account for a number of home heating fires, the heaters now being manufactured are relatively safe. Nonetheless, precaution must be taken when operating any type of heating device.

Generally, oil heaters are considered safer than regular electric convection or radiant heaters because they have lower surface temperatures and require less consideration of air flow through/over the heater itself. These heaters create warmth by warming heat-conserving oil inside the heater. The oil is then circulated throughout the coils of the radiator to evenly distribute heat throughout the room.

However, these types of heaters are only suitable for small, personal spaces ranging from 40 square feet for an under-desk style unit to 150 square feet. Another added benefit of a small desk-type unit is that these are extremely energy efficient and do not blow fuses even when hooked up to the same power grid as the computer that sits on top of the desk they are placed under.

Once again, it should be noted that although the high intensity of the output of space heaters may make them more susceptible to fires, most portable electric space heaters now being manufactured include many performance requirements in order to enhance user safety.

Nonetheless, portable space heaters have received a bad reputation recently. Although these types of heaters may present a fire hazard when tipped over, almost all portable electric heaters now being produced boast safety features such as safety switches that will automatically turn off the heater until it is turned upright, overheat protection functions, and indicator lights which help you know when the heater is plugged in or turned on. As well, modern space heaters are also subjected to rigorous laboratory testing and must pass certain safety standards.

However, when using any electric heater, caution must be exercised in order to reduce the risk of fire. Follow these tips to ensure safe heater operation:
1. Use the heater on the floor for stability - never place a heater on furniture since it may fall and could result in a fire hazard, and never leave a heater unattended.
2. Do not hide cords under rugs or carpets, as placing anything on top of the cord could cause a fire by overheating.
3. Be sure the plug fits properly into an outlet since a loose plug can overheat. Have a worn-out plug or outlet replaced if necessary.
4. Keep the heater away from debris and paints, solvents, and other flammable liquids.
5. Ensure proper working order of your heater by replacing missing controls or guards at once, and never operate a defective heater.

By being smart about your heater, you can safely keep your area warm and comfortable during the cooler months.

Jeanie Wong is a marketing writer with extensive knowledge of heating, cooling, and purification systems.



By Jeanie Wong

What You Should Know Before You Buy a High Efficiency Boiler

Boilers that are rated above 90% are called condensing boilers. They are designed to extract heat from the combustion gases that's normally lost in the exhaust lower rated boilers.
This energy saving process will only occur under certain conditions.

Condensing boilers rely on lower water temperatures of 135 degrees F and lower to gain higher efficiencies.

I've seen high efficient rated condensing boilers that were operating at efficiencies in the mid 80% range because the water temperatures were too high to allow the boiler to condense and release the extra heat into the heating system.

The best way to ensure low water temperatures are to use a control system also adjusts the water temperature according to the outdoor temperature as well as the indoor temperature.

These systems are called weather responsive controls or outdoor reset controls.

Not only can it save 15% - 20% on your energy bill but also increases comfort. It provides a constant, steady flow of heat throughout the house.

Some boilers are equipped with this control and some are sold as an option.

Stay clear of those who try to sell a condensing boiler without this control strategy if you want to reap the benefits of a high efficiency boiler.

Another thing you should consider is the material the heat exchanger is made from.

For a long-lasting boiler choose one with a stainless steel heat exchanger rather than aluminum.
One boiler manufacturer stopped making boilers with aluminum heat exchangers because of their concern of longevity.

Follow these tips and you'll get the return on investment you are looking for.

Ed Bishop brings over thirty years of experience to the art of designing and installing engineered living environments for homeowners and offers the widest array of solutions to improve the safety, comfort, quality and efficiency of new and existing homes.

Please visit www.heating-and-air-conditioning-guide.com

By E Bishop

Wood Burning Stoves In Your Home

Wood burning devices, such as fireplaces and stoves, are among the most dangerous systems found in the home. Poor installation, or lack of maintenance, can lead to a serious fire hazard.

Wood burning stoves and fireplaces are found in many homes, both older and new construction. These systems, because poor maintenance or improper installation is so common, can be the cause of a fire. Due to the vulnerability of these systems, the professional home inspector must carefully evaluate them.

More often than not, unless a chimney sweep or another professional has recently performed professional service, the home inspector finds a multitude of correctable problems that are significant safety issues. These concerns, while the list below is not intended to be inclusive, would typically involve heavy deposits of creosote in the stove, fireplace or flue (the purpose of the chimney is to vent exhaust gases not to collect combustible materials); broken or cracked firebricks; loose, torn or generally bad gaskets at doors; poorly planned and unsafe installations such as insufficient clearances to combustibles; or the very common malady of the short hearth. A hearth protects the floor and should extend out at least 18 inches past the opening of the wood-burning device. That non-combustible hearth on the floor protects carpets and flooring materials from being assaulted by burning embers.

As a result of the safety issues involved with wood burning devices and chimneys, the National Fire Protection Association recommends that a Level 2 chimney inspection should be made part of every sale or transfer of property. A Level 2 inspection is an in-depth inspection by a specially trained and licensed chimney professional. Such an inspection goes beyond the visual inspection provided by a home inspector and can catch subtle, but potentially serious, safety hazards that exist at the fireplace, stove, flue and associated components.

This article was produced by the writing team of Eric Badgely & Angee Gardner; specializing in Bellingham Wa Condos and Bellingham Real Estate, along with Lummi Island Home inspectors. Making sure buyers are protected.

By Eric Badgely and Angee Gardner